Belshina JSC would like to inform you that the experimental research workshop, the central plant laboratory, the water supply and sewerage workshop, the electrical supply workshop, the research electrical laboratory, the dry cleaning and laundry section, the mechanical plant provide services to individuals and organizations.
In case of interest write in the feedback form on the site
or e-mail: mikulichem@belshina.by.
List of services provided by Belshina Mechanical Plant to third parties
DOCX / 14,45 Kb
Price list for services of Belshina JSC
PDF / 1,59 Mb
Прейскурант на услуги участка химчистки и стирки
PDF / 285,21 Kb
| № | Services | Unit | Service cost without VAT, rub. |
|---|---|---|---|
| 1 | Washing clothes | 1 kg | 4,12 |
| 2 | Washing clothes | 1 kg | 4,09 |
| 3 | Sewing a fabric tear on a sewing machine | 100 cm | 1,20 |
| 4 | Sewing machine patch | 100 cm2 | 3,38 |
| 5 | Sewing on buttons by hand | 1 piece | 0,40 |
| 6 | Dry cleaning | 1 kg | 3,61 |
Contact phone number: 41-14-75
|
№ |
Name of the test | TNLA establishing requirements for testing |
|
1 |
Determination of elastic strength properties under tension | GOST 270 GOST ISO 37 ISO 37 |
|
2 |
Determination of tensile strength at 100°C | GOST 270 GOST ISO 37 ISO 37 |
|
3 |
Determination of tensile elastic properties after thermal aging | GOST 270 GOST 9.024 |
|
4 |
Determination of tear resistance | GOST 262 |
|
5 |
Determination of the brittleness temperature limit | GOST 7912 |
|
6 |
Determination of hardness according to Shore A | GOST 263 ISO 48 |
|
7 |
Determination of Shore A hardness after thermal exposure | GOST 263 |
|
8 |
Determination of Shore hardness on samples after thermal aging | GOST 263 GOST 9.024 |
| 9 | Determination of rebound elasticity | GOST 27110 |
| 10 | Determination of rebound elasticity after thermal exposure | GOST 27110 |
| 11 | Determination of the change in relative elongation after aging in air for 24 hours at a temperature of 100°C | GOST 9.024 |
| 12 | Determination of abrasion resistance | GOST 12251 GOST 23509 method А GOST 426 |
| 13 | Determination of density | GOST 267 |
| 14 | Determination of relative residual compression strain | GOST 9.029 method А |
| 15 | Determination of heat generation, residual deformation and fatigue endurance under repeated compression | GOST 20418 |
| 16 | Determination of heat generation, residual deformation and fatigue endurance under repeated compression after thermal aging | GOST 20418 GOST 9.024 |
| 17 | Determination of fatigue endurance under repeated stretching | GOST 261 |
| 18 | Multiple longitudinal bending test of specimens with a straight groove | GOST 9983 |
| 19 | Multiple longitudinal bending test of straight groove specimens after thermal aging | GOST 9983 GOST 9.024 |
| 20 | Determination of the mass fraction of dry residue of rubber adhesive | М 46-12.2-8С GOST 2199 |
| 21 | Determination of concentration based on dry residue | М 46-12.2-7С |
| 22 | Carbon black test for iodine number determination | GOST 25699.3 |
| 23 | Testing carbon black for pH determination in aqueous suspension | GOST 25699.6 method А |
| 24 | Carbon black test for determination of dibutyl phthalate absorption | GOST 25699.5 |
| 25 | Carbon black test for loss on heating | GOST 25699.7 ASTM D 1509 |
| 26 | Carbon black test for determination of residue after sieving through a sieve | GOST 25699.10 |
| 27 | Carbon black ash content test | GOST 25699.8 |
| 28 | Determination of viscosity of regenerate | GOST 10722 ТУ 2511-018-73018769 |
| 29 | Determination of elastic strength properties of regenerated material | GOST 270 ТУ 2511-018-73018769 |
| 30 | Determination of water absorption of rubber and rubber products | GOST 16914 paragraph 3.19 |
| 31 | Determination of the resistance of rubber and rubber products in a stress-free state to the effects of liquid aggressive environments | GOST 9.030 method А |
| 32 | Determination of the relative elongation index after exposure to aggressive factors for 24 hours at a temperature of 23°C | GOST 9.030 method В |
| 33 | Determination of changes in hardness after exposure to an aggressive environment | GOST 9.030 |
| 34 | Determination of the bond strength between layers during delamination | GOST 6768 |
| 35 | Determination of the bond strength of metal cord to rubber | GOST 14311 |
| 36 | Determination of the bond strength of the cord thread to the rubber | GOST 23785.7 |
| 37 | Determining the bond strength between rubber and the roller ski wheel hub | |
| 38 | Determination of the tensile strength of wire | GOST 10446 |
| 39 | Testing of rubber compounds and vulcanizates to determine the general environment | GOST 26554 method 2 |
| 40 | Testing rubber compounds and vulcanizates to determine the mass fraction of carbon black and ash (express method) | М 46-12.2-17С |
| 41 | Tests of rubber compounds and vulcanizates for determination of free sulfur | М 46-12.2-11С |
| 42 | Testing of rubber compounds and vulcanizates to determine ash content | GOST ISO 247-1 |
| 43 | Testing rubber compounds and vulcanizates to determine the mass fraction of zinc oxide | М 46-12.2-12С method А |
| 44 | Determination of volatile matter content | ISO 248-1 |
| 45 | Determination of nitrogen content | ISO 1656 |
| 46 | Determination of the content of contaminants | ISO 249 |
| 47 | Determination of ash content | ISO 247-1 |
| 48 | Determination of viscosity by Mooney | ISO 289-1 |
| 49 | Determination of pre-vulcanization of rubber compounds | GOST 10722 |
| 50 | Determination of vulcanization characteristics of rubber compounds | ISO 6502 |
| 51 | Conducting tests on a rubber processability analyzer | |
| 52 | Determination of plastoelastic properties using a plastometer | GOST 415 |
| 53 | Determination of the adhesiveness of rubber compounds | |
| 54 | Determination of plasticity and plasticity retention index | ISO 2007 ISO 2930 |
| 55 | Silicon dioxide loss test at 105°C | GOST 18307 paragraph 3.7 |
| 56 | Loss on ignition test of silicon dioxide at 1000°C | ISO 3262-1 paragraph 5.2 |
| 57 | Silicon dioxide test to determine silicon dioxide content (from calcined sample) | GOST 18307 paragraph 3.6 |
| 58 | Silicon dioxide test for pH determination of aqueous extract | GOST 18307 paragraph 3.15 |
| 59 | Test of silicon dioxide for determination of specific surface area by phenol adsorption | GOST 18307 paragraph 3.17 |
| 60 | Testing silicon dioxide to determine the specific surface area of BET | ISO 18852 |
| 61 | Manufacturing of rubber compound | ISO 5794-2 |
| 62 | Production of rubber compounds in a laboratory rubber mixer | |
| 63 | Testing chemically precipitated chalk to determine the mass fraction of calcium carbonate and magnesium carbonate in terms of calcium oxide | GOST 8253 paragraph 4.4 |
| 64 | Testing chemically precipitated chalk to determine the mass fraction of free alkali in terms of calcium oxide | GOST 8253 paragraph 4.5 |
| 65 | Testing chemically precipitated chalk to determine the mass fraction of substances insoluble in hydrochloric acid, including the mass fraction of sand | GOST 8253 paragraphs 4.6 и 4.7 |
| 66 | Testing chemically precipitated chalk to determine the mass fraction of moisture | GOST 8253 paragraph 4.11 |
| 67 | Testing chemically precipitated chalk to determine the residue after sifting on a sieve with mesh №0045K, 014K | GOST 8253 paragraph 4.12 |
| 68 | Testing of oil-filled ground sulfur to determine the mass fraction of sulfur | GOST 127.2 paragraph 2 |
| 69 | Testing of ground oil-filled sulfur to determine the mass fraction of acids in terms of H2SO4 | GOST 127.2 paragraph 4 |
| 70 | Testing of oil-filled ground sulfur to determine the mass fraction of organic substances | GOST 127.2 paragraph 5.3 |
| 71 | Testing of ground oil-filled sulfur to determine the mass fraction of water | GOST 127.2 paragraph 12 |
| 72 | Testing of oil-filled ground sulfur to determine the mass fraction of screening residue on a sieve with a mesh size of 0.14 | GOST 127.2 paragraph 13 |
| 73 | Determination of moisture content in crushed reclaimed rubber | TS BY590619191.001 |
| 74 | Determination of the content of ferrous metal particles in crushed regenerated rubber | TS BY590619191.001 |
| 75 | Determination of the presence of foreign impurities (wood, stones, sand) | TS BY590619191.001 |
| 76 | Determination of the presence of textile fibers in crushed regenerated rubber | TS BY590619191.001 |
| 77 | Determination of moisture content in synthetic fiber from tire cord | TS BY590619191.009 |
| 78 | Determination of the presence of foreign impurities in synthetic fiber from tire cord | TS BY590619191.009 |
| 79 | Determination of heat resistance of synthetic fiber from tire cord | TS BY590619191.009 |
If you are interested, to clarify the details of interaction, cost and conditions of work, please contact us by phone +375 225 411 052.
Experimental and research workshop
meets the criteria of the National Accreditation System of the Republic of Belarus and is accredited for compliance with the requirements of STB (State standard of the Republic of Belarus) ISO/IEC 17025-2007 and carries out certification tests of tires in accordance with the scope of accreditation.
Research electrotechnical laboratory
is able to provide services in electro-physical measurements, industrial testing, repair, adjustment and diagnosis of automated electrical drive.
Water supply and sewage department
renders services in supplying sub-subscribers with energy parameters i.e. technical, domestic potable, hot and network water, compressed air, domestic sewage and storm water drainage.
The power supply department
can provide services for the supply of electrical energy.
tire selection